Відео

Can you please let me know dimensions? And type of dado rail? This is beautiful ❤ great job

Hi we're having issues attaching parts 3 and 4 to the headboard. Could you please help

Thank you for this video. We’ve just purchased economy delight seats for our upcoming flight to India. Looks like we’ve made the right choice, especially for the extra leg room and early check in.

That’s awesome!

Stunning ❤

Will the pax 75cm be offered with one large door or 2 symmetrical doors? Instead of the 2 different size doors the original pax offers?

Great review thanks, I would like to put one over my bbq but have a raised platform and two of the legs would be on the lower level, only about 6" but can the legs be cut down? thanks

wow!! looks your guests were ravenous!!!!

My bed came with no instructions, thank you so so much for taking the time to do this! Life saver!🩷

Are the pool 24 hrs open for adults

I have a Wren kitchen and had the delaminating issue. However, my experience was positive. My kitchen was 9 years old. Wren replaced all the doors and panels free of charge. They also replaced 3 oven cabinets as they no longer made the doors in the sizes that would fit above my ovens. It did take several months before everything was delivered correctly. They also covered the cost of removing and fitting the new parts. So not all Wren experiences are horror stories.

There are no more corner units showing on the Pax 2.0 pages. I need one for my new closet. Do you know if they are coming?

Installed Pax 2.0 for a client yesterday. They've addressed ALL the previous issues in one hit. Don't be put off by the naysayers, this stuff is good.

Woooow!! You did an AMAZING job! 👏 🎉

Bq do some metal profiles aswell as timber in the same size. How did you secure the tiles

Does it have showers,?

Sand the wooden handle x

Does the new Pax system have to be wall mounted? We have baseboards and I'm worried about it being flush!

Wow🤩I wouldn’t have thought to use slabs for worktops 😮looks amazing!

What flooring are you using for the cladding? Is it heat resistant?

Another great job! 👏🏼

Get well soon. Rest and a couple of hot totties never hurt 😂. Looks amazing!

Looks amazing..🎉 Hope you feel better soon.❤

Omg, the worktops!!!! We need an episode on the worktops!!!

Looks like a "hack" will be required if you are hoping to fit the old style sliding door rails onto these as they don't have the holes pre-drilled in the top panel for the two plastic top clips to fit through ... (part number 124341) that help support the top rail

Great job getting it done with simple, inexpensive tools and using extra stock as a guide. Thank you for sharing this confidence-building video.

thanks to find you I was looking to buy this and wanted to look for review found you Great help

What are those slabs you are using as tops, they look brilliant. Where did you get them from

Do you know if the new drawers are fully extendable? I have the 13 inch ones and they don’t even open halfway. Some videos I have seen on the pax komplement drawers are that some fully open and some don’t. I don’t understand why this is. Any insight would be helpful. The current drawers are basically useless and if I had know I wouldn’t have purchased.

This update looks awful as an avid dyier. No option to cut down length, if the backboard breaks (highly prone to due to its flimsyness), much more difficult to repair, inflexible design whereby earlier you could combine 2 broken paxes together by swapping parts, now much harder since the sideboards and top boards can't be rotated and plastic parts that are unique and harder to replace. This is honestly so sad and I really hope it doesn't go through. I still have a bunch of old pax parts at home that I was planning on assembling and selling, but now I'm not so sure anymore. (Edit for fixing grammar mistakes).

Hi please can u let me know what wood you used pls...even better if you can attach the link?

Because I have only ever bought the deeper units, I didn’t realise that they didn’t offer the same shelves for the smaller units. You did another great job 🔨 I spy an orange box 🛍️

You fed them well

It looked really good. Were you able to take it down and keep it in one piece for this year 🪄

Deck boards are upside down......

USA stores are showing stock now, but the wall mounting process is different than other countries. I find that very interesting.

Is this still valid I can't get it to work 😢 x

What a fantastic job!! Amazing and inspiring! I’m thinking of doing something similar but putting the wallpaper on the back of the original wooden board that comes with the IKEA shelves. Is there any reason you would think that wouldn’t work? I thought it might eliminate the problem of dealing with the little gap at the back of the units.. thoughts are welcome 😊

Was this terminal A or B? I know there is one in each.

hehehe I love your manifest UA-cam button frame. Kudos!!! xxx

You are my hero! I ❤ all your renovations!

Can you post the link as it doesn’t work on the temu site

Looks lovely, thank you for sharing 😊

That’s hilarious. People spend money to get composite - artificial wood - decking to look like real wood and you’ve put in time and money to do the reverse. 😂😂😂😂😂

It’s perfect! Thank you for the inspiration!❤

Wish I had known about this, I would have waited for 2.0 instead of buying and stockpiling the older parts in my master bedroom for a year. They look easy to put together too. I can put the old ones together in 15 min using a nail gun for the back, but the back is the worst part. These don't seem much better with reagrds to the back, but they are Similar to the new ENHET with the keyhole slots. I don't think they will be as sturdy, but when you screw a few of them together, maybe so. I would have much rather pur 14 of these together than the old ones. At least the Komplement parts will fit.

This looks amazing! Can’t wait to see how you did it ❤

A very similar new pax frame appears to be available on Ikea's USA website but it appears to come with a wall-mounting rail. Did yours come with a rail? The rail part number in the new manuals is 10116976, 10116987, or 10117011 depending on the width of the frame. It is unclear to me if the rail is an optional anchoring mechanism for tipping prevention or is a significant structural part for the back board. If the former, I am confused why the frame can't anchor directly into the behind wall like the older pax frame designs. I am having a hard time finding a video that shows how to install the rail, which i think adds significantly increased difficulty to the installation process for a novice DIYer.

This is beautiful!! I know you said you were feeding about 40 and thought maybe it was too much, but I don't know, looks like you planned just enough!

when are these being released in the UK? the Pax frames I'm looking at now currently have manuals online still showing the old full assembly process